Rubber and metal in one jar
On this page14
Half the group is elastomer
O rings, supply washers, hose washers and valve seats are rubber or a synthetic elastomer, and they perish rather than corrode.
Which is an oxidation and ozone problem
An elastomer hardens, cracks and loses its sealing function over years, and it does so faster in warmth and light.
And the other half is metal or plastic
Compression ferrules, tank bolts, pipe clips and push fit clips, which corrode or do not.
So the two halves want opposite storage
An elastomer wants cool and dark. A metal part wants dry above all, because moisture is what corrodes it.
Which the shelf can serve both ways
47 of the 251 containers are white and 26 are black, both opaque, against 91 clear. Opaque for the elastomers and clear for finding the metal ones.
Teflon tape is a third case again
Which is chemically inert and mechanically fragile. Its enemy is being crushed in a drawer rather than anything chemical.
And it comes on a spool
Which is a shape no jar on this shelf is designed around, though a 59 mL jar will hold one.
The capacity range suits all of it
5 to 500 mL with a median of 177, and 60 containers under 60 mL for the small quantities.
210 of 251 containers are jars
Which is the right format for parts picked out by hand, and the only format that matters for ten kinds of small article.
Our temperature range field is published on all 251
Which for an elastomer stored in a garage through a summer is the field that bears on the storage question.
Though it describes the container rather than the contents
The fire and light property makes the same distinction: a rating is what the wall tolerates and not a statement about what is inside.
So the field narrows the container choice and not the shelf life
Which is the honest reading, and the elastomer's own life is a property of the elastomer.
None of which touches the lead question
Which is about water contact in service rather than about storage, and is the half of this property that comes from the statute.