Containers for fluids and additives
For businesses packaging fluids and additives, with capacity, neck finish, case pack and case price published on every container.
Top picks for fluids and additives
64 oz Natural HDPE Industrial Round Bottle$2.59 eachcase of 48
32 oz Natural HDPE F Style Bottle$1.76 eachcase of 123
300 cc White HDPE Packer Bottle$0.56 eachcase of 385
250 cc White HDPE Packer Bottle$0.74 eachcase of 270
16 oz Black HDPE Cylinder Round$0.90 eachcase of 240
32 oz Natural HDPE Cylinder Round$1.29 eachcase of 108
16 oz Natural HDPE Twin Neck Bottle$2.41 eachcase of 174
16 oz White HDPE Imperial Bullet Cosmo$0.77 eachcase of 210Guides
Getting started
Brake fluid
The container ruleS5.2.1: resealable closure, impervious inner seal, tamper-proof feature, at 177 mL and above.The label rule, word for wordS5.2.2.2: seven items, four verbatim warnings, never on a removable part.The immersion testS6.14: slit the label, immerse the container in its own fluid for 15 minutes, wipe, and read it at 305 mm.Grades, and the number on the labelDOT 3, 4, 5 and 5.1, and why the minimum wet boiling point is a packaging matter.
The other four
Coolant, and ethylene glycol10 percent or more by weight triggers special packaging and a specified signal word.Washer concentrate, and methanol4 percent is the lowest threshold in the whole list, and washer concentrate is mostly methanol.Fuel and oil additivesHydrocarbons at 10 percent under 100 SUS, and the aspiration warning for petroleum distillates.The spout, and pouring into a fill neckEverything here is poured into a reservoir, often at an angle, often in bad light.
What goes wrong
The label came offA nick, then fluid under the facestock, then a corner lifting. The standard has a test for this.There was no inner sealA cap with a liner is not the same as a sealed package, and brake fluid absorbs water either way.The wrong side of a thresholdA dilution change, a cheaper carrier, or a seasonal blend that moved a percentage.Somebody refilled the containerThe rule prints a warning against it, and special packaging may not be reused.
Containers
What we actually stock for this82 containers, every one HDPE, 250 to 3,785 mL, with 169 closures.Closures and liners169 closures, 67 with a heat-induction-seal liner, across the necks this shelf actually uses.Sizes, from a 250 mL additive to a gallon250 to 3,785 mL, and the size decides the handling more than the rules.
