Chain lube and tubeless sealant
On this page11
Chain lube
Oil, wax or a ceramic suspension in a carrier. The carrier decides both the resin compatibility and whether the product is a hazardous substance under the Act.
Applied drop by drop onto a moving chain
Which is a dispensing requirement rather than a container one. A precise spout or a needle applicator beats anything that pours.
26 spouted closures on this shelf
Which is the relevant set, and the archetype's preferred flip and disc tops at 19 and 36 are the alternative for a thicker wax.
Solvent-carried lubes rule out most of the shelf
A solvent in PET is the usual failure. 174 HDPE containers are the tolerant end and the 20 glass are the certain one.
Tubeless sealant
A latex emulsion carrying particulate that plugs a puncture. It separates on standing, it dries out if it meets air, and it commonly contains ammonia.
Separation makes shakeability the specification
Headspace, a closure that holds when inverted, and ideally a wide enough mouth to get it moving again. A full bottle cannot be mixed.
Drying out is a closure failure
Latex skins where it meets air. A liner that seals is what stops a half bottle becoming a solid, and there are 11 liners and sealing discs here.
And ammonia is hard on aluminium
Which is a real property with real consequences for rims and valve stems. It is not a labeling requirement under 16 CFR 1500.14, and this property does not claim it is.
Pouring sealant is awkward by nature
It goes into a valve stem or through an injector, and a wide mouth helps with filling the injector while a narrow one helps with the pour. Most brands choose narrow and sell the injector.
Both are decants as often as not
Bought in a large bottle and moved into a small one for a ride or a race bag. The shop consumables property covers the labelling side of moving a regulated liquid into another container.