The products

Pickle and patina

On this page11

What pickle is Warm is the part that matters Which is the archetype's point exactly Glass and polypropylene are the candidates And never steel tongs in the pickle Patina solutions are more varied and more hazardous This property gives no handling advice What it can say is light and closure And the liner Twelve child resistant closures References

Warm acid, in a pot, all day. That is a container requirement with no room in it.

What pickle is

An acidic solution used to remove oxide and flux after soldering. Commonly sodium bisulfate for bench use, kept warm, and used repeatedly across a working day.

Warm is the part that matters

A container holding warm acid continuously is under a duty cycle that a cold storage bottle never sees. Heat accelerates whatever the acid is doing to the vessel.

Which is the archetype's point exactly

"Chemical resistance is the entire decision. Check the resin chart first." For pickle that is correct and it is the first question.

Glass and polypropylene are the candidates

50 glass and 80 PP containers on this shelf. Glass is inert; polypropylene tolerates heat better than PET and is the usual polyolefin where warmth is involved.

And never steel tongs in the pickle

Which is bench lore with a chemical basis: ferrous metal in pickle plates copper onto everything in the pot. Copper or titanium tongs, and that is a tool decision rather than a container one.

Patina solutions are more varied and more hazardous

Liver of sulfur, ferric nitrate and selenium-based blackeners are all in common use and they are not interchangeable in hazard terms.

This property gives no handling advice

The safety data sheet for the specific product is the authority, and a container catalog offering chemistry guidance on selenium compounds would be out of its depth.

What it can say is light and closure

The archetype marks this craft light sensitive and the shelf has 30 amber containers. Liver of sulfur in particular degrades and is usually bought in small quantities for that reason.

And the liner

9 liners and sealing discs. For an acid or an oxidiser the liner is in contact with the contents and is the component that fails first.

Twelve child resistant closures

Not required by anything in this property. For a bench in a home studio with acids and selenium compounds on it, a reasonable voluntary choice.

References

The archetype behind this shelf is ind-chemical: 100 to 20,000 mL, narrow mouth, HDPE and glass, light sensitive, child resistant, poured, with "chemical resistance is the entire decision, check the resin chart first" as its stated reason. It describes the pickle and patina half of the craft and not the metal half, and the shelf disagrees with it: 224 of 286 containers are jars.

The Davis Pack Supply catalog, measured 19 October 2026. The jewelry metalwork shelf is 617 rows: 286 containers and 331 closures. 15 mL to 9,464 mL with a median of 237; 12 containers at 30 mL or under, 104 at 120 or under, 214 at a pint or under. 117 PET, 80 PP, 50 glass, 38 HDPE. 224 jars, 41 bottles, 19 tubs and pails, 1 jug, 1 tube. 89 clear, 74 white, 39 natural, 30 amber, 26 black. Closures: 248 continuous thread, 22 dome lids, 18 lug and twist, 12 child resistant, 10 round tubs, 9 liners and sealing discs, 5 phenolic, 5 specialty.

Written from 15 U.S.C. 295 and 297, and from the catalog as it stood on 19 October 2026. Silver tolerances at 15 U.S.C. 296 were not read for this property and are not summarized. The FTC Jewelry Guides at 16 CFR part 23 govern how jewelry is described and are a separate body of rules. Pickle and patina chemistry is a safety data sheet question and no handling advice is given here.